Clutch Kit 9.5 inch (3 Piece) 6 Cylinder 1965 - 1978

Fits Jaguar XKE 4.2 1965 - 1971, MK2 3.4/3.8 Late *, MK2 340, S-Type 3.4/3.8 Late ** , 420, MKX 4.2, XJ6 1969 - 1978 With Manual Transmission.  All 6 Cylinder XK Engines with a 9-1/2""-241mm clutch fitted. Most 6 Cylinder Jaguar Models from 1964 1978 with a manual Transmission fitted

High Quality Aftermarket AP Lockheed Branded Product. 9.5Inch, 3 Piece Clutch Kit. 1 Set per car. 

9-1/2" inch kit with a diaphragm operated pressure plate. This 3 piece kit contains the pressure plate, Clutch Disc and Release Bearing (with clips) This is a direct replacement for the stock fitted 9.5 Inch clutch.  

* MK2 From 3.4 ltr Engine # KJ8237 Onward, 3.8 Engine # LE2981 Onward and all Engine # From 7J50001 Onward (340 Models)

** S-Type From 3.4 ltr Engine # 7B6572 Onward, 3.8 Engine # 7B60391 Onward.

Jaguar fitted a 10" coil spring operated pressure plate assembly from the first XK120 XK engine up to the first 4.2 XKE. Due to the increase of horse power Jaguar would change the clamping pressure accordingly resulting in an 50% increase between the clutch fitted to the XK120 and the XKE 3.8. From 1964 Jaguar switch supplier and all 3.4, 3.8 and 4.2 had a 9.5" diaphragm operated clutch fitted. This new clutch has an improved clamping pressure with a softer pedal feel and less pedal pressure. As a special ordered item Jaguar would still fit the 10" clutch to later cars, mainly done for competition use. The clamping pressure on the later 9.5" clutch was 1600 pounds of clamping pressure. All later cars with the 9.5" clutch fitted can be retro fitted with a 10" clutch. The flywheel needs to be adapted (drilled) to take the 10" clutch or you can order our aluminum flywheel which is dual drilled and will accept the 9.5 and the 10" clutch. See listings below.

All returns must include a copy of the invoice. If the invoice is lost and cannot be located the return will be delayed.

We will not accept any returns after 45 days so please inspect your order upon receipt. (Cores Exempt)

Electrical parts are not returnable for any reason except in cases where the part is defective or the part was looked up incorrectly. Once an electrical part has been installed it can only be returned if found to be defective.

There is a 20% re-stocking fee assessed to all special order parts returns. (Cores Exempt)

Cores for re-manufactured parts must be returned to us in the original box will all the core tags attached. All cores must be fully assembled and with no external damage.

Cores should be returned to:
Engel Inc
865 Lenox Ave, Suite D
Portage, MI 49024

Should you receive a damaged package or part please notify UPS immediately, and then call us (800)851-9438, so that we can help to correct the problem.

All orders must be inspected upon receipt, if there is any damage is must be noted on the bill of lading. If damage is found after the shipment is accepted the carrier must be notified within 48 hours to be able to file a concealed damage claim.

Accessories installed at the time of the new vehicle purchase are covered for 36 months/36,000 miles, from the vehicle's in-service date, whichever occurs first, under the New Vehicle Limited Warranty.

Accessories installed by the dealer after the new vehicle purchase are covered for 12 months, regardless of mileage, from the accessory installation date, or the remainder of the New Vehicle Limited Warranty, whichever provides greater coverage.

Accessories purchased over-the-counter are covered for 12 months from the date of purchase.

Car covers are warranted for 12 months from the purchase date and are not covered by the New Vehicle Limited Warranty