WILWOOD FRONT CALIPER CONVERSION

Wilwood Branded Fits MK2.

Front Aluminum Wilwood Caliper conversion set.

Wilwood is the choice if you are looking for the maximum efficiency in braking for your XKE. Wilwoods DynaPro four piston radial mount calipers combine pure race technology with a new generation of Wilwood performance enhancements. The DynaPro combines the versatility of radial mounting with a sleek profile, superior strength, and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications. The strength of the DynaPro is a combination of process and design. The process of stress-flow forging re-aligns the internal grain structure of the metal to flow within the contour of the caliper body. This produces a part with superior strength over machined block billet parts or castings. The FEA generated body design features a radial transition between the piston bores and caliper bridges. This eliminates machined steps and shoulders in this critical strength area and substantially increases the resistance against deflection and body separation under high load. Structural deflection and volume displacement testing have proven the efficiency of this innovative design. The bottom line is a firm pedal with outstanding stopping power. The DynaPro incorporates exclusive Wilwood performance enhancements. Stainless SRS bridge plates eliminate caliper bridge wear from pad gouging while dampening noise and vibration during engagement. Internal fluid passages eliminate the need for external crossover tubes and four corner bleed screws allow effective gas evacuation regardless of mounting location.

All returns must include a copy of the invoice. If the invoice is lost and cannot be located the return will be delayed.

We will not accept any returns after 45 days so please inspect your order upon receipt. (Cores Exempt)

Electrical parts are not returnable for any reason except in cases where the part is defective or the part was looked up incorrectly. Once an electrical part has been installed it can only be returned if found to be defective.

There is a 20% re-stocking fee assessed to all special order parts returns. (Cores Exempt)

Cores for re-manufactured parts must be returned to us in the original box will all the core tags attached. All cores must be fully assembled and with no external damage.

Cores should be returned to:
Engel Inc
865 Lenox Ave, Suite D
Portage, MI 49024

Should you receive a damaged package or part please notify UPS immediately, and then call us (800)851-9438, so that we can help to correct the problem.

All orders must be inspected upon receipt, if there is any damage is must be noted on the bill of lading. If damage is found after the shipment is accepted the carrier must be notified within 48 hours to be able to file a concealed damage claim.

Accessories installed at the time of the new vehicle purchase are covered for 36 months/36,000 miles, from the vehicle's in-service date, whichever occurs first, under the New Vehicle Limited Warranty.

Accessories installed by the dealer after the new vehicle purchase are covered for 12 months, regardless of mileage, from the accessory installation date, or the remainder of the New Vehicle Limited Warranty, whichever provides greater coverage.

Accessories purchased over-the-counter are covered for 12 months from the date of purchase.

Car covers are warranted for 12 months from the purchase date and are not covered by the New Vehicle Limited Warranty